Product Description
The Overpass Crash Barrier is a bridge-edge vehicle restraint system installed along the deck edge, central median, or between traffic lanes and adjacent functional areas. Rather than relying on driven posts embedded in a roadside shoulder, it transfers impact forces into the bridge structure through continuous horizontal beams, posts, base plates, embedded anchors, fasteners, terminal sections, and transition components. When a vehicle leaves the traffic lane and strikes the rail, the beams, post supports, and deck anchoring work together to restrain penetration and guide the vehicle back along the barrier line. The system can be built as a steel beam-and-post structure, a steel-and-concrete combination, or another project-specified design, with height, post spacing, and connection methods set by the road design speed, vehicle composition, bridge edge condition, and protection objective.
Because a bridge railing must match the deck it is fixed to, manufacturing it correctly depends on reading the bridge drawings rather than only the railing dimensions. Our technical team reviews each order against the elevation and connection drawings before production, checking railing height, post spacing, base plate size, anchor hole positions, component thickness, and the embedded or chemical anchoring arrangement, and reviews the available installation space and transport limits for non-standard curved and transition sections. Complex curved runs, terminal connections, and bridge-approach transition parts are produced as samples or first pieces so the buyer can confirm dimensions and assembly relationships before batch production, which reduces the risk of mismatched anchor positions and base-plate alignment problems on site.
Specifications
|
Parameter |
Specification |
|
System Type |
Bridge-mounted vehicle restraint: steel beam-and-post, steel-and-concrete combination, or project-specified design |
|
Total System Height |
900–1500 mm, subject to project drawings |
|
Post Spacing |
Normally 1000–2000 mm |
|
Main Material |
Q235, Q355, or project-specified equivalent structural steel |
|
Component Thickness |
Commonly 4–16 mm for beams, posts, and base plates; thickness selected by structural position |
|
Deck Connection |
Base plates, embedded components, or anchoring assemblies with matching connection plates and fasteners |
|
Anti-Corrosion Method |
Hot-dip galvanized, galvanized plus powder coated, or multi-layer heavy-duty coating |
|
Custom Sections |
Straight, curved, terminal, and bridge-approach transition sections per approved drawings |
Applications
1. Expressway Bridges and Overpasses - high-speed traffic on elevated structures leaves no roadside shoulder to dissipate energy, so the deck-anchored beam-and-post system transfers impact loads into the bridge structure rather than a driven-post foundation.
2. Central Medians on Long-Span Bridges - continuous overlapping beams and matched transition sections keep the barrier line unbroken at expansion joints and medians, so a contacting vehicle is guided along the rail instead of crossing into opposing lanes.
3. River-Crossing and Mountain Bridges - humid, de-icing-salt, or large temperature-change environments demand heavier anti-corrosion treatment, so hot-dip galvanized or multi-layer coated components reduce maintenance repainting over the bridge service life.
4. Bridge Approach Transitions - where a roadside guardrail meets a bridge-mounted system, purpose-built transition sections and terminal ends keep protection continuous and avoid a stiff join that could snag a vehicle.

Customization
Railings are manufactured to project drawings with configurable height, post spacing, component thickness, material grade, anti-corrosion method, and connection arrangement. Straight, curved, terminal, and bridge-approach transition sections are cut and welded to the bridge alignment, with matching base plates, anchors, connection plates, and fasteners supplied for installation per the approved drawings. Product marking, outer packaging, and mixed specification combinations can be customized, and OEM and ODM orders are accepted. The technical team reviews drawings before production, and non-standard curved or transition parts are released for batch production only after first-piece confirmation.
Packaging & Transportation
For export delivery, railing components are protected with waterproof film, rubber separators, and steel band strapping, and fasteners are packed separately for easy checking and installation. Timber supports are used inside the container to reduce movement and collision during long-distance transport, and pallets can be provided on request. Components can be numbered by bridge section so they unload and install in the correct sequence. Every export shipment is recorded with a loading video for shipment tracking and receiving inspection. EXW is our preferred trade term.
FAQ
Q1: Can you manufacture the overpass crash barrier according to our bridge drawings?
A1: Yes. We produce based on bridge elevation and connection drawings, and our technical team reviews railing height, post spacing, base plate dimensions, anchor hole positions, component thickness, and the anchoring arrangement before production. Non-standard curved, terminal, and transition parts enter batch production only after first-piece confirmation.
Q2: What lead time should we plan for a drawing-based bridge railing order?
A2: Drawing-based products normally require about 10–15 days after technical confirmation, with the final schedule depending on component count, welding work, and surface treatment. Standard stocked specifications normally require about 3–5 days, and the confirmed delivery time can be written into the contract.
Q3: Can we inspect the barrier before shipment, and what happens if transport damage arrives?
A3: Yes. Quality control covers incoming material inspection, production patrol checks, anti-corrosion process control, and final inspection before shipment, and buyers may visit the factory or appoint a third-party inspector. If transport damage is reported, keep photos, videos, and shipping documents for review, and our after-sales team responds within 24 hours with handling or replacement arrangements.
Hot Tags: overpass crash barrier, China overpass crash barrier manufacturers, suppliers, factory, Aluminum Alloy Bridge Railings, bridge transition barrier, corrugated steel bridge barrier, Decorative Bridge Railing, Galvanized Steel Bridge Guardrail, W beam bridge barrier

