Roadside Sign Pole

Roadside Sign Pole

The Roadside Sign Pole is a steel support used to secure warning signs, prohibition signs, directional signs, and large road information panels along traffic routes. The structure range covers single-post, double-post, single-cantilever F-type, and double-cantilever T-type systems, chosen according to the sign dimensions and installation position: single-post structures carry smaller roadside panels, double-post structures give two support points for wider signs, and cantilever structures extend the panel toward or above the lanes.
Send Inquiry
Description

Product Description

The Roadside Sign Pole is a steel support used to secure warning signs, prohibition signs, directional signs, and large road information panels along traffic routes. The structure range covers single-post, double-post, single-cantilever F-type, and double-cantilever T-type systems, chosen according to the sign dimensions and installation position: single-post structures carry smaller roadside panels, double-post structures give two support points for wider signs, and cantilever structures extend the panel toward or above the lanes. Steel tube suits cutting, welding, flange connections, and stiffening work, which lets the same product line cover a small shoulder sign and a large overhead directional panel. Typical positions include highway shoulders, the area outside the roadside guardrail, ramp merging sections, interchange exits, service areas, and multi-lane direction points.

 

For road projects that buy sign posts in dozens or hundreds of pieces, the practical risk is not a single good pole but variation between deliveries: flange holes that do not line up, heights that drift between batches, or welds that look different from the previous order. Our production flow concentrates material preparation and continuous production around repeated and standard specifications, with first-piece confirmation before a customized order runs in batch and internal checks running from incoming steel to finished product. Mixed orders can also combine single-post, double-post, F-type, and T-type structures under one delivery, each component numbered by installation point, which keeps the site crew from sorting mismatched parts between separately sourced materials.

 

Specifications

Parameter

Specification

Structural Types

Single post, double post, F-type cantilever, or T-type cantilever

Single-Post Size Range

Φ114–219 mm diameter, 4–6 mm wall thickness, 3.5–5 m height

Double-Post Size Range

Φ165 mm or Φ219 mm, 5–8 mm wall thickness, 4–6 m height

Cantilever Main Post

Φ273–426 mm, 6–12 mm wall thickness

Cantilever Arm

3–12 m extension

Surface Treatment

Hot-dip galvanized with reference to ISO 1461

Coordinated Supply Option

Aluminum traffic signs supplied together with the supporting steel structure

Order Basis

Sign area, foundation conditions, project wind load, and approved structural drawing

 

34

Applications

1. Highway Shoulders and Guardrail-Outside Positions - Single-post structures carry warning, prohibition, and small directional panels where the shoulder provides enough space.

2. Ramp Merging Sections and Interchange Exits - Cantilever structures extend the panel toward the lanes so the direction information reaches drivers at the decision point.

3. Service Areas and Multi-Lane Direction Points - Larger panels on double-post or F-type arrangements serve the reading distance needed on multi-lane roads.

4. Projects Buying Signs and Poles Together - Coordinated supply lets the sign mounting position, flange holes, and embedded bolts be checked within one order instead of matched on site.

 

Customization

Pole bodies, flanges, stiffening plates, and connecting parts are manufactured to the traffic sign support drawing, covering steel pipe size, wall thickness, pole height, sign mounting position, and embedded bolt hole spacing. Aluminum traffic signs can be supplied together with the steel structure. Product marking and outer packaging can carry the buyer brand, OEM and ODM orders are accepted, and customized products enter mass production after first-piece confirmation.

 

Packaging & Transportation

For export, pole components are wrapped with waterproof film, separated with protective materials, and secured with steel straps, while flange ends and galvanized surfaces receive additional protection. Connecting components are packed separately, and timber supports are used inside the container to reduce movement. Each component can be numbered by installation location, and large projects are delivered in batches according to the construction plan. Production updates, packing lists, and logistics information are supplied to help receiving and installation. EXW is our preferred trade term.

 

FAQ

Q1: Can one order combine different structural types?

A1: Yes. Single-post, double-post, F-type, and T-type structures can be combined in one project order, and each component is numbered according to its installation location, so the site crew can assemble sets without sorting mismatched parts.

Q2: Can the traffic signs themselves be supplied together with the poles?

A2: Yes. We can supply aluminum traffic signs together with the supporting steel structure, which allows the sign mounting position, flange holes, and embedded bolts to be coordinated within one project order.

Q3: How is batch consistency controlled for repeat orders?

A3: Internal quality control covers incoming material inspection, production patrol checks, anti-corrosion process control, and final inspection before shipment. Repeat orders on the same drawings skip repeated drawing review and production setup, and third-party inspection is supported during production or before shipment.

 

 

Hot Tags: roadside sign pole, China roadside sign pole manufacturers, suppliers, factory, Cantilever Sign Pole, Galvanized Sign Pole, Metal Road Sign Post, round traffic sign post, traffic sign post foundation, traffic signage pole