Breakaway Sign Post

Breakaway Sign Post

The Breakaway Sign Post is a steel support structure built to hold warning signs, prohibition signs, directional signs, exit advance signs, and lane guidance panels on highway alignments. The support family covers single-post, double-post, single-cantilever F-type, and double-cantilever T-type forms, so the same fabrication flow can cover a small roadside panel on the shoulder and a large directional sign that must reach above several lanes.
Send Inquiry
Description

Product Description

The Breakaway Sign Post is a steel support structure built to hold warning signs, prohibition signs, directional signs, exit advance signs, and lane guidance panels on highway alignments. The support family covers single-post, double-post, single-cantilever F-type, and double-cantilever T-type forms, so the same fabrication flow can cover a small roadside panel on the shoulder and a large directional sign that must reach above several lanes. Single-post and double-post structures sit on the highway shoulder or just outside the guardrail line, while cantilever arms carry the panel toward or over the traffic lanes at ramps, exits, and interchanges. Pole diameter, wall thickness, height, and foundation cannot be chosen from the sign category alone; they follow the sign panel area, project wind load, approved installation drawings, and foundation design.

 

For a highway project, the support structure is usually fixed after the sign size and the civil foundation are already decided, and a mismatch between the steel pole and the foundation bolts is expensive to correct on site. Our technical team reviews each structural drawing before fabrication, checking pipe diameter, wall thickness, pole height, cantilever length, flange holes, stiffening plates, and the sign mounting position, and we confirm the first piece before batch production. Long components are also checked against transport restrictions so that sections can be divided for on-site assembly instead of being refused by the carrier. This drawing-based process keeps the delivered pole aligned with the approved foundation, which reduces field modification work at highway installation points.

 

Specifications

Parameter

Specification

Structural Forms

Single-post, double-post, single-cantilever F-type, double-cantilever T-type

Single-Post Common Sizes

Φ114–219 mm diameter, 4–6 mm wall thickness, 3.5–5 m height

Double-Post Common Sizes

Φ165 mm or Φ219 mm, 5–8 mm wall thickness, 4–6 m height

Cantilever Main Post

Φ273–426 mm diameter, 6–12 mm wall thickness

Cantilever Arm

3–12 m length, commonly Φ140–219 mm pipe

Total Structure Height

Normally 6–9 m for cantilever systems

Surface Treatment

Hot-dip galvanized steel fabrication

Order Basis

Approved structural and foundation drawings; dimensions follow sign panel area, project wind load, and foundation design

 

31

Applications

1. Highway Shoulders and Roadside Sign Locations - Single-post structures place warning, prohibition, and small directional panels where the shoulder width and sight distance allow a roadside installation without blocking the guardrail line.

2. Ramp Merging Areas and Highway Exits - Cantilever arms carry exit advance and lane guidance panels over the lanes, so drivers read the direction information at the decision point instead of searching a roadside panel.

3. Interchange and Multi-Lane Direction Points - T-type or double-cantilever structures support wider panel arrangements where one roadside post cannot cover the required lanes or viewing angle.

4. Guardrail-Outside Sign Positions - Where the shoulder must stay clear, the pole sits outside the guardrail line, and the drawing review confirms the flange and embedded bolt layout matches the civil foundation.

 

Customization

Pole diameter, wall thickness, height, cantilever length, flange dimensions, stiffening plates, and sign mounting holes are manufactured to the project structural drawings. F-type or T-type cantilever direction, section division for transport, and surface treatment can be configured per project. Product marking and outer packaging can carry the buyer brand, OEM and ODM orders are accepted, and customized orders enter batch production only after first-piece or key structural detail confirmation.

 

Packaging & Transportation

Long poles and cantilever components are classified and bundled for transport, with ends and flange surfaces receiving additional protection. Flanges, bolts, and smaller connecting parts are packed separately, and timber reinforcement is added inside the container to reduce collision during long-distance shipping. Components can be numbered by installation point, and large orders can be delivered in batches to match the construction schedule. Waterproof film, rubber separators, and steel band strapping are used for export protection, and the loading process is recorded. EXW is our preferred trade term; for FOB or CIF shipments, ocean freight risk transfers to the buyer after the goods board the vessel.

 

FAQ

Q1: How do we select the correct pole diameter and wall thickness for our sign?

A1: Diameter, wall thickness, height, and foundation are determined by the sign panel area, project wind load, installation drawings, and foundation design, not by the sign category. Please send the approved structural and foundation drawings; our technical team reviews the pipe size, flange holes, and mounting position before production.

Q2: Can long cantilever poles be split for transport and assembled on site?

A2: Yes. During drawing review we check transport restrictions and divide long components into sections for on-site flange connection. The sectional plan, flange surfaces, and connecting bolts are prepared together, so the buyer only needs to match the numbered sections at the installation point.

Q3: What should be checked before installation to avoid foundation mismatch?

A3: Before installation, check the concrete foundation, embedded bolts, flange dimensions, and the drawing version against the delivered structure. Keeping photos, videos, and shipping documents is also recommended if transport damage is found on arrival, so the after-sales team can review responsibility quickly.

 

 

Hot Tags: breakaway sign post, China breakaway sign post manufacturers, suppliers, factory, Cantilever Sign Pole, Highway Sign Pole, Steel Traffic Sign Pole, traffic sign mounting column, traffic sign pole profile, traffic signage pole